Before the start of the horizontal tensile testing machine, we must understand that many people may not understand it very well. Next, we will introduce the preparation before the horizontal tensile testing machine starts:
1. Check for any abnormalities in the parts. The fastening screws (caps) must not be loose. The brake should be normal and reliable.
2. The horizontal tensile testing machine cannot roll the workpiece beyond the specified range of mechanical properties of the bending machine.
3, the workpiece must be placed in a stable position, before the position can be driven to operate, and the signal should be clearly specified, one person command.
4. Strictly adjust the distance of the reeling machine according to the thickness of the sheet, and do not overload the operation.
5. When the horizontal tensile testing machine is not full of round workpieces, it is recommended to reserve a certain amount when rolling to the end of the steel plate to prevent the workpiece from falling and hurting people.
6. Check if the coupling guard or belt cover is securely fixed.
The above is a detailed introduction to the preparation work before the horizontal tensile testing machine is started. Knowing this, you can make your horizontal tensile testing machine use longer, and it should not be damaged during the running period, which can save resources.