• KEHUI

    KEHUI

  • KEHUI

    KEHUI

  • KEHUI

    KEHUI

  • KEHUI

    KEHUI

  • KEHUI

    KEHUI

>
>
>
WAW-1000E microcomputer controlled electro-hydraulic servo hydraulic universal testing machine

Tel:+86-400-658-1817 +86-531-87597726/27/28

Mobile:+86-18653111522  +86-13153003087

Service phone:+86-400-618-6356


E-mail:

jnkh@vip.163.com

Mobile website


Add:

No. 6288, Jingshi West Road, Jinan City

The company has strong processing and manufacturing capabilities. For more than ten years, we have been dedicated to the development and manufacture of metal material testing machines. The accumulation of tens of thousands of products experience, continuous improvement, products are more reasonable, more complete, more practical, more reliable.

© 2019 Jinan KOOHEI TEST MACHINE Co., Ltd. 鲁ICP备12345678号-1 Powered by www.300.cn

Professional R & D and manufacturing testing machine - Kehui test equipment

Page view

WAW-1000E microcomputer controlled electro-hydraulic servo hydraulic universal testing machine

没有此类产品
Description
First, product introduction
 
WAW-E series microcomputer controlled electro-hydraulic servo universal testing machine is mainly used for tensile test of mechanical properties such as tensile, compression and bending of metal materials. It can test cement, concrete, brick, tile, rubber and its products after adding simple accessories. .
   The machine consists of a four-column double-screw cylinder under the high-strength main engine and a piano-type oil source control cabinet. The oil pump adopts the Italian low-noise high-performance gear pump imported from Mazuqi. The stretching space is located above the mainframe, and the compression and bending tests are located below the main unit, that is, between the middle beam and the work table. The adjustment of the test space is realized by moving the middle beam, and the middle beam is lifted and driven by a chain. The computer fully automatic closed-loop control high-performance electro-hydraulic proportional servo valve completes the tests of stretching, compression and bending of various materials. After the test is completed, the experimental results of FM, REH, REL, RPO.2, RP1, RM and elastic modulus E of the materials are automatically taken.
 
Second, the function introduction
 
1. The special super-thick jaw seat is used to clamp the sample in the jaws, so that the jaws are completely contained in the jaw seat, so that the sample clamping is more reliable, and the possibility of trumpet-shaped deformation damage due to the shallow jaw seat is eliminated. Increased equipment life.
2. A wear-resistant lining plate is added between the jaw seat and the jaw plate to prevent the scale from falling during the metal stretching process, causing the slope of the jaw seat to be scratched, so that the clamping process is smoother and the addition is more reliable.
3. It has various control modes such as constant velocity stress, constant velocity strain, constant velocity displacement, tension control, program editor, etc. Various control modes can be arbitrarily and smoothly switched during the experiment.
4. The measurement and control software is based on the Chinese windowsXP operating system platform. It has fast running speed, gentle interface, menu prompt, mouse operation, and multiple sample information input modes, which can meet the testing needs of different materials. For the same condition, the sample is automatically generated once in one input, and a condition template can also be created.
5. The sample information, test data, test curve, etc. are automatically stored after the test is automatically completed.
6. Automatically switch to the appropriate range according to the size of the test force or the deformation of the material to ensure the accuracy of the test data measurement.
7. Test data (test force, displacement, deformation) The loading state and test curve are displayed along with the dynamic real-time screen of the test process.
8. According to the actual needs, the stress-strain, force-displacement, force-time, displacement-time curves can be selected for display, analysis and printing.
9. With automatic and manual two-mode analysis test results, the corresponding corresponding points of the test results can be found on the test curve only with the mouse.
10. Users can edit standard text report format or EXCEL text report format arbitrarily according to actual needs.
11. Automatic overload protection shutdown when the load exceeds 2%-5% of full scale
12. All relevant historical records can be automatically queried according to conditions such as sample conditions, test date and test data.
13. The software reserves the database interface, which is convenient for inter-laboratory local area network and is convenient for experimental data management.
 
Third, the main technical indicators
Maximum test force
 
1000KN
 
Test force measurement range
 
2%-100%
 
Test machine accuracy
 
Level 1 or level 0.5
 
Test force resolution
 
Maximum load 1/300000
 
Deformation indication relative error
 
< ±1% of the indicated value
 
Deformation resolution
 
Maximum deformation 1/300000
 
Maximum stretching space
 
650mm
 
Maximum compression space
 
600mm
 
Piston stroke
 
250mm
 
Column spacing
 
580mm
 
Round specimen maximum clamping range
 
Φ6-Φ60 mm
 
Flat specimen maximum clamping thickness
 
0-40 mm
 
Flat specimen maximum clamping width
 
75 mm
 
Platen size
 
Φ160 mm
 
Clamping method
 
Hydraulic clamping
 
Maximum piston speed
 
80mm/min
 
Maximum moving speed of the beam
 
150mm/min
 
Bending roller maximum spacing
 
600mm
 
control method
 
Triple closed loop control and programming control
 
Safety device
 
Mechanical limit and software overload protection
 
Mainframe dimensions
 
900*710*2300mm
 
Oil source console size
 
1100*750*1000 mm
 
Total motor power
 
2.5KW
 
total weight
 
2800kg
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待

Products

Messages